AUTOMATIC LOADING AND UNLOADING LAMINATING HOT PRESS

production line
- INDUSTRIAL WOODEN PLANKS SYSTEM
  - Small production line
  - Nesting line
  - Cabinet Line
- SYSTEM MAKE CHAIR
  - Shaping Stage
  - Tenoner Stage
  - Link building Stage
  - Leg angle chair Stage
  - Fisnish Stage
- DOOR MAKING SYSTEM
  - Công đoạn làm khung bao
  - Công đoạn làm cánh cửa
  - Công đoạn làm khung xương
- FINGER JOINT SYSTEM
- LOG MULTI RIP SAW SYSTEM
- PAPER LAMINATING MACHINE
WOODWORKING MACHINE
- CNC MACHINE
  - CNC Nesting Machining
  - Machine router CNC
  - CNC DRILLING MACHINE
  - Machine tenoner CNC
- SAWING MACHINE
  - Straight line ripsaw
  - Sliding table saw
  - Panel saw
  - Cut off saw
  - Four side saw
  - Band saw
  - Horizontal band saw
  - Zig saw
  - Band saw CNC
  - Log saw
  - Radial arm saw
  - Combined machine
  - Double End Saw
  - Máy cắt tạo bọ eke ghế
- EDGE BANDING MACHINE
  - Edge banding machine
  - Automatic edge banding machine
  - Postforming machine
  - Inclined edge banding
- DRILLING MACHINE
  - Multi horizontal drilling machine
  - Multi vertical drilling machine
  - Máy khoan ghế
  - Straight line boring machine
  - Door Lock - Hinge Drilling Machine
  - Máy khoan 2 phương
  - Máy khoan 6 mặt
  - Máy khoan 2 đầu
- PLANER MACHINE
  - Double side planer
  - 4 side planer
  - Hand jointer
  - Automatic planer
  - Seat planer
- SANDING MACHINE
  - Conveyors sanding
  - Round sander
  - Irregular curve sanding
  - Edge sanding
  - Wide belt sanders
  - Lacquered panel sander
  - Milling sanding machine
  - Deformation sanding machine
  - Top-Bottom Sanding Systems
- TENONER MACHINE
  - Hollow chisel mortiser
  - Continuous dovetailer
  - Fully auto louver groovers
  - Oscillating Mortiser
  - Round end tenoner
  - Machine tenoner Oval
- SHAPING MACHINE
  - Copy shaping machine
  - Copy shaping circle machine
  - Spindle shaper machine
- LATHE MACHINE
- ENGRAVING MACHINE
- FINGER JOINT AND CLAMP CARIER
  - Auto finger joint machine
  - Clamp carrier machine
  - High Frequency Press machine
  - Frame assembly machine
- PRESSING MACHINE
  - Hot press equipment
  - Cold press equipment
  - Door Pressing Machine
  - Veneer membrane press
  - Wood bending
  - High frequency press
- GRINDING MACHINE
- VENEER MACHINE
- DOWEL MAKING MACHINE
- POWER FEEDER
- UV COATING MACHINE
- GLUE SPREADER
- WOOD PALLET MAKING MACHINE
- EMBOSSING MACHINE
- WOOD BARKING MACHINE
- DUST COLLECTOR
- AIR COMPRESSOR
- AUXILIARY MACHINE
- Máy cắt bọ eke
- Máy đa chức năng
FINISHING LINE
HARD WARE
- CIRCULAR SAW BLADES
- PCD Diamond Saw Blades
- BORING HEAD
- PLANER KNIFE
- HAND TOOLS
- OTHER
USED MACHINE
- SAWING MACHINE
- SANDING MACHINE
- CNC MACHINE
- EDGE BANDING MACHINE
- SHAPING MACHINE
- FINGER JOINT AND PRESSING MACHINE
- AIR COMPRESSOR
- VENEER MACHINE
- SYSTEM LEATHER MACHINE
- PLASTIC INJECTION MACHINE
- OTHER MACHINE

AUTOMATIC LOADING AND UNLOADING LAMINATING HOT PRESS

Model: TM6 x 9

Description
- Laminating hot press is fit for the furniture factory or panel secondary processing plant, which can make lamination for furniture panel,building partition, wooden door or laminate all kinds of decorative material on man-made board. - It also can be used for drying or leveling veneer.
Features
- Adopt solid drilled conduction board, warming up faster, uniform thermal conductivity, and energy consumption lower. - Omron or Schneider main electric components, it is stable and durable. - Hawe valve from German for auto-open hydraulic valve, high holding pressure, reliable performance, less human factors. - Piston mode for cylinder. Grind, plate hard chromium on the surface and polish piston after heat treatment. It is durable and high precision. Adopt special seal-rings for reliability and durability. - Mylar for in and out of the hose, external spoke flexible reinforced, using cycle is long and difficult to damage. - Configure foot-operated and pull E-stop switch, temperature secondary protection equipment.
Specifications hot press machine
Total pressure	: 3000 kN
Working layers	: 1
Hot platen No.& specification	: 2-3000 ×1800 × 42 mm
Cylinder No. & diameter	: 10 - Ø 125 mm, 2- Ø 85 mm
Opening	: 200 mm
Loading speed	: 18 m/min（frequency）
Heating way and medium	: electric heating thermal oil
Heating power	: 48+0.75 kw
Max.working temperature	: 120℃
Control way	: automatic, PLC touch screen
Specifications belt conveyor

Belt width	: 1800 mm
Belt pulley center distance	: 3000 mm
Working height	: 850 mm
Conveying speed	:18 m/min(frequency)
Motor power	: 1.5 kw
Specifications unloading roller conveyor

Max.conveying width	：1800 mm
Max.conveying length	：3000 mm
Working height	：850 mm
Conveying speed	: 15-25 m/min
Installed power	: 0.75 kw
Video