Feature |
|
Structure |
Pre-milling unit is equipped with 2 timed intervention motors to guarantee a perfect finish. The auto-set device ensures optimum ositioning of the milling tool according to the thickness of the panel being machined |
|
|
Optimum gluing thanks to differential temperature control between the glue pot and the glue spreading roller. An automatic stand-by device avoids glue over heating during temporary non-use of the machine.
Quick, easy maintenance thanks to the teflon inner coating. Automatic cutting device for 3 mm edges
|
End Trimming unit removes excess edging tape at the front and rear of the panel with the 2 high frequency motors ensuring reliability and cutting accuracy. The end trimming unit can be tilted (0-15 degrees) automatically from the control panel |
|
|
Fine trimming unit trims the top and bottom of the edges, with the 2 high-frequency motors and rotating vertical/horizontal disc copiers |
The Corner rounding unit with two motors applies the radius not only on the front and rear edges but also on the upper and lower parts of the panel |
|
|
The Edge scraper eliminates imperfections resulting from previous machining operations on the top and bottom of the edge |
The Glue Scraper removes excess glue from the top and underside of the panel. This is the only model on the market fitted with 4 pneumatic cylinders for a top quality finish.
|
|
|
Buffing unit for cleaning and polishing the edge and panel. |
Visualisation and management of the glue temperature of the roller and the glue pot |
|
|
Easy program management thanks to the intuitive interface, available in numerous languages |
Specification |
Model |
JADE 240 |
Machine length |
5213 mm |
Panel height |
10-60 mm |
Height of edge banding material |
14-64 mm |
Thickness of edge banding material in rolls / strips |
0.4-8 mm |
Min panel length |
150 mm |
Min panel width (with length mm 150) |
85 mm |
Min panel width (with length mm 250) |
50 mm |
Track feed speed |
12 m/min |
Dust extraction system for each operating unit 1 hood dia |
100 mm |
Pneumatic connection |
7 Bar |
Glue pot capacity (approx.)
|
2 Kg
|
Glue pot heating time at ½ load (approx.)
|
10 min
|
With pre-milling unit
|
8 kW
|
With pre-milling & corner rounding unit
|
10 kW
|
Video |