HIGH FREQUENCY WOOD BOARD JOINING MACHINE

production line
- INDUSTRIAL WOODEN PLANKS SYSTEM
  - Small production line
  - Nesting line
  - Cabinet Line
- SYSTEM MAKE CHAIR
  - Shaping Stage
  - Tenoner Stage
  - Link building Stage
  - Leg angle chair Stage
  - Fisnish Stage
- DOOR MAKING SYSTEM
  - Công đoạn làm khung bao
  - Công đoạn làm cánh cửa
  - Công đoạn làm khung xương
- FINGER JOINT SYSTEM
- LOG MULTI RIP SAW SYSTEM
- PAPER LAMINATING MACHINE
WOODWORKING MACHINE
- CNC MACHINE
  - CNC Nesting Machining
  - Machine router CNC
  - CNC DRILLING MACHINE
  - Machine tenoner CNC
- SAWING MACHINE
  - Straight line ripsaw
  - Sliding table saw
  - Panel saw
  - Cut off saw
  - Four side saw
  - Band saw
  - Horizontal band saw
  - Zig saw
  - Band saw CNC
  - Log saw
  - Radial arm saw
  - Combined machine
  - Double End Saw
  - Máy cắt tạo bọ eke ghế
- EDGE BANDING MACHINE
  - Edge banding machine
  - Automatic edge banding machine
  - Postforming machine
  - Inclined edge banding
- DRILLING MACHINE
  - Multi horizontal drilling machine
  - Multi vertical drilling machine
  - Máy khoan ghế
  - Straight line boring machine
  - Door Lock - Hinge Drilling Machine
  - Máy khoan 2 phương
  - Máy khoan 6 mặt
  - Máy khoan 2 đầu
- PLANER MACHINE
  - Double side planer
  - 4 side planer
  - Hand jointer
  - Automatic planer
  - Seat planer
- SANDING MACHINE
  - Conveyors sanding
  - Round sander
  - Irregular curve sanding
  - Edge sanding
  - Wide belt sanders
  - Lacquered panel sander
  - Milling sanding machine
  - Deformation sanding machine
  - Top-Bottom Sanding Systems
- TENONER MACHINE
  - Hollow chisel mortiser
  - Continuous dovetailer
  - Fully auto louver groovers
  - Oscillating Mortiser
  - Round end tenoner
  - Machine tenoner Oval
- SHAPING MACHINE
  - Copy shaping machine
  - Copy shaping circle machine
  - Spindle shaper machine
- LATHE MACHINE
- ENGRAVING MACHINE
- FINGER JOINT AND CLAMP CARIER
  - Auto finger joint machine
  - Clamp carrier machine
  - High Frequency Press machine
  - Frame assembly machine
- PRESSING MACHINE
  - Hot press equipment
  - Cold press equipment
  - Door Pressing Machine
  - Veneer membrane press
  - Wood bending
  - High frequency press
- GRINDING MACHINE
- VENEER MACHINE
- DOWEL MAKING MACHINE
- POWER FEEDER
- UV COATING MACHINE
- GLUE SPREADER
- WOOD PALLET MAKING MACHINE
- WOOD BARKING MACHINE
- EMBOSSING MACHINE
- DUST COLLECTOR
- AIR COMPRESSOR
- AUXILIARY MACHINE
- Máy cắt bọ eke
- Máy đa chức năng
HARD WARE
- CIRCULAR SAW BLADES
- PCD Diamond Saw Blades
- BORING HEAD
- PLANER KNIFE
- HAND TOOLS
- OTHER
FINISHING LINE
USED MACHINE
- SAWING MACHINE
- SANDING MACHINE
- CNC MACHINE
- SHAPING MACHINE
- EDGE BANDING MACHINE
- FINGER JOINT AND PRESSING MACHINE
- AIR COMPRESSOR
- VENEER MACHINE
- SYSTEM LEATHER MACHINE
- PLASTIC INJECTION MACHINE
- OTHER MACHINE

Specifications
Model	SM84H35	SM124H35
Main voltage	3 þ 380 (V+/- 5% ) (50 Hz)	3þ, 380V(+ - 5%) (50 hz)
Input power	50 KVA	50 KVA
Pressed out products	1220 x 2440 mm	1220 x 3660 mm
Max. Height pressed	80 mm	80 mm
Min. Height pressed	15 mm	15 mm
Control way	Hydraulic	Hydraulic
Hydraulic motor	5 HP	7,5 HP
Countertops	Non-stick coating the top and bottom
Number of cylinders	Horizontal 12 pcs Vertical 3 pcs	Horizontal 16 pcs Vertical 5 pcs
Machine size	7650x2100x2150 mm
N.W	5000 kg	8000kg
Feed motor	1.5 HP	1.5 HP
- Type of glue used: Use the glue one-component and two-component (note: two-component adhesive can only be used for about 20-25 minutes back, if after the time on the adhesive will lose its effect, glue does not stick) - Time pressed finished 1 plate (From the table above presses down on the table until the countertops go up) + 2-3 min / plate (thickness of 30mm or less). + 3-4 min/ plate (thickness 30 – 75 mm) + 4– 5 min for thickness 75 - 90 mm
Video

HIGH FREQUENCY WOOD BOARD JOINING MACHINE

HIGH FREQUENCY WOOD BOARD JOINING MACHINE

Model: SM84H35/SM124H35

AUTOMATIC EDGE BANDING MACHINE

MULTIPLE RIP SAW ( Heavy Duty)

CNC 5 AXIS MACHINE

COMPUTER PANEL SAW

4 SIDE PLANER & MOULDER

SLIDING TABLE SAW

AUTOMATIC EDGE BANDING MACHINE

MULTIPLE RIP SAW ( Heavy Duty)

CNC 5 AXIS MACHINE

COMPUTER PANEL SAW

4 SIDE PLANER & MOULDER

SLIDING TABLE SAW

About

BUSINESS