OPTIMIZING MOVEABLE MULTIPLE RIP SAW

production line
- INDUSTRIAL WOODEN PLANKS SYSTEM
  - Small production line
  - Nesting line
  - Cabinet Line
- SYSTEM MAKE CHAIR
  - Shaping Stage
  - Tenoner Stage
  - Link building Stage
  - Leg angle chair Stage
  - Fisnish Stage
- DOOR MAKING SYSTEM
  - Công đoạn làm khung bao
  - Công đoạn làm cánh cửa
  - Công đoạn làm khung xương
- FINGER JOINT SYSTEM
- LOG MULTI RIP SAW SYSTEM
- PAPER LAMINATING MACHINE
WOODWORKING MACHINE
- CNC MACHINE
  - CNC Nesting Machining
  - Machine router CNC
  - CNC DRILLING MACHINE
  - Machine tenoner CNC
- SAWING MACHINE
  - Straight line ripsaw
  - Sliding table saw
  - Panel saw
  - Cut off saw
  - Four side saw
  - Band saw
  - Horizontal band saw
  - Zig saw
  - Band saw CNC
  - Log saw
  - Radial arm saw
  - Combined machine
  - Double End Saw
  - Máy cắt tạo bọ eke ghế
- EDGE BANDING MACHINE
  - Edge banding machine
  - Automatic edge banding machine
  - Postforming machine
  - Inclined edge banding
- DRILLING MACHINE
  - Multi horizontal drilling machine
  - Multi vertical drilling machine
  - Máy khoan ghế
  - Straight line boring machine
  - Door Lock - Hinge Drilling Machine
  - Máy khoan 2 phương
  - Máy khoan 6 mặt
  - Máy khoan 2 đầu
- SANDING MACHINE
  - Conveyors sanding
  - Round sander
  - Irregular curve sanding
  - Edge sanding
  - Wide belt sanders
  - Lacquered panel sander
  - Milling sanding machine
  - Deformation sanding machine
  - Top-Bottom Sanding Systems
- PLANER MACHINE
  - Double side planer
  - 4 side planer
  - Hand jointer
  - Automatic planer
  - Seat planer
- TENONER MACHINE
  - Hollow chisel mortiser
  - Continuous dovetailer
  - Fully auto louver groovers
  - Oscillating Mortiser
  - Round end tenoner
  - Machine tenoner Oval
- SHAPING MACHINE
  - Copy shaping machine
  - Copy shaping circle machine
  - Spindle shaper machine
- LATHE MACHINE
- ENGRAVING MACHINE
- FINGER JOINT AND CLAMP CARIER
  - Auto finger joint machine
  - Clamp carrier machine
  - High Frequency Press machine
  - Frame assembly machine
- PRESSING MACHINE
  - Hot press equipment
  - Cold press equipment
  - Door Pressing Machine
  - Veneer membrane press
  - Wood bending
  - High frequency press
- GRINDING MACHINE
- VENEER MACHINE
- DOWEL MAKING MACHINE
- POWER FEEDER
- UV COATING MACHINE
- GLUE SPREADER
- WOOD PALLET MAKING MACHINE
- EMBOSSING MACHINE
- WOOD BARKING MACHINE
- DUST COLLECTOR
- AIR COMPRESSOR
- AUXILIARY MACHINE
- Máy cắt bọ eke
- Máy đa chức năng
HARD WARE
- CIRCULAR SAW BLADES
- PCD Diamond Saw Blades
- BORING HEAD
- PLANER KNIFE
- HAND TOOLS
- OTHER
FINISHING LINE
USED MACHINE
- SAWING MACHINE
- SANDING MACHINE
- CNC MACHINE
- EDGE BANDING MACHINE
- SHAPING MACHINE
- FINGER JOINT AND PRESSING MACHINE
- AIR COMPRESSOR
- VENEER MACHINE
- SYSTEM LEATHER MACHINE
- PLASTIC INJECTION MACHINE
- OTHER MACHINE

MODEL: GRS – 460M

+ 1- 4 Moveable sawblades with laser

+ Simple and easy operation

+ Calculating to an optimization result automatically according to operator's setting.

+ Stable and accurate material feed

may-cua-rong-nhieu-luoi-tu-dong-dieu-chinh-khoang-cach1

may-cua-rong-nhieu-luoi-tu-dong-dieu-chinh-khoang-cach2

FUNCIONS

Marking line cutting

Cutting on the setting line. No specific size

Maximum setting line is 4 (1 fixed, 4 moveable)

may-cua-rong-nhieu-luoi-tu-dong-dieu-chinh-khoang-cach3

Total width optimized cutting

The operator only needs to set a line for total width, then the computer will perform optimized cutting

2-1 Wider size priority

2-2 Same size priority

2-3 Highest price priority

2-4 Fixed size

2-5 Border fixed size

2-6 Middle fixed size

2-7 Fixed size moved

2-8 Switch arrangement

Once total width is set, the computer will select combinations suitable for the total width. The laser unit will indicate the cutting position, the operator should visually check if it is suitable or not. If not, change to next arrangement immediately by simply pressing the button.

may-cua-rong-nhieu-luoi-tu-dong-dieu-chinh-khoang-cach4

AB line optimized cutting

For area set as A lines, size cutting will be located inside of the limes. For area set as B line, size cutting will be located outside of the line. The defective area should be set as B line to avoid cutting on knots.

may-cua-rong-nhieu-luoi-tu-dong-dieu-chinh-khoang-cach5

may-cua-rong-nhieu-luoi-tu-dong-dieu-chinh-khoang-cach6

Edging

Ripping

Separating defects

SPECIFICATIONS

Sawblade Diameter

Ø405 (16”)/115mm,

Ø 355 (14”)/90mm

Max. Cutting Thickness

Ø 305 (12”)/65mm,

Ø 254 (10”)/40mm

Min. Cutting Thickness

12mm

Max. Cutting Width

460mm

Max. infeed width

785 mm

Min. Cutting Length

690 mm

Feeding speed

10~40m/min

Chain Width

490 mm

Sawblade keyway

20mm x 2

Distance between keyways

80 mm

Sawblade spindle diameter

Ø 55mm

Spindle speed

3800 rpm

Saw drive motor

50 HP

Feed motor

3 HP

Pressure rollers elevation motor

1/2 HP

Saw arbor elevation motor

1/4HP

Saw arbor movable servo motor

1 HP x 1~4

Dust hood outlet diameter

Ø 150 mm (6”)*2

Table height from floor

890mm

Machine size

(460) 2000x1810x3115 mm

Video

contact-info-quoc-duy-woodworking-machine-qd

OPTIMIZING MOVEABLE MULTIPLE RIP SAW

OPTIMIZING MOVEABLE MULTIPLE RIP SAW

MODEL: GRS – 460M

MÁY CƯA RONG LƯỠI DƯỚI

MÁY CƯA XẺ GỖ TRÒN

MÁY CƯA XẺ GỖ TRÒN NHIỀU LƯỠI

HEAVY DUTY STRAIGHT LINE RIP SAW

STRAIGHT LINE RIP SAW 90MM

SLITTING UNDER THE TRIMMING SAW MAHINE

STRAIGHT LINE RIP SAW SEMAC

STRAIGHT LINE RIP SAW

About

BUSINESS

+ 1- 4 Moveable sawblades with laser + Simple and easy operation + Calculating to an optimization result automatically according to operator's setting. + Stable and accurate material feed

FUNCIONS

SPECIFICATIONS
Sawblade Diameter	Ø405 (16”)/115mm, Ø 355 (14”)/90mm
Max. Cutting Thickness	Ø 305 (12”)/65mm, Ø 254 (10”)/40mm
Min. Cutting Thickness	12mm
Max. Cutting Width	460mm
Max. infeed width	785 mm
Min. Cutting Length	690 mm
Feeding speed	10~40m/min
Chain Width	490 mm
Sawblade keyway	20mm x 2
Distance between keyways	80 mm
Sawblade spindle diameter	Ø 55mm
Spindle speed	3800 rpm
Saw drive motor	50 HP
Feed motor	3 HP
Pressure rollers elevation motor	1/2 HP
Saw arbor elevation motor	1/4HP
Saw arbor movable servo motor	1 HP x 1~4
Dust hood outlet diameter	Ø 150 mm (6”)*2
Table height from floor	890mm
Machine size	(460) 2000x1810x3115 mm
Video