STANDARD TOP-BOTTOM SANDING SYSTEMS 0.6M

production line
- INDUSTRIAL WOODEN PLANKS SYSTEM
  - Small production line
  - Nesting line
  - Cabinet Line
- SYSTEM MAKE CHAIR
  - Shaping Stage
  - Tenoner Stage
  - Link building Stage
  - Leg angle chair Stage
  - Fisnish Stage
- DOOR MAKING SYSTEM
  - Công đoạn làm khung bao
  - Công đoạn làm cánh cửa
  - Công đoạn làm khung xương
- FINGER JOINT SYSTEM
- LOG MULTI RIP SAW SYSTEM
- PAPER LAMINATING MACHINE
WOODWORKING MACHINE
- CNC MACHINE
  - CNC Nesting Machining
  - Machine router CNC
  - CNC DRILLING MACHINE
  - Machine tenoner CNC
- EDGE BANDING MACHINE
  - Edge banding machine
  - Automatic edge banding machine
  - Postforming machine
  - Inclined edge banding
- SAWING MACHINE
  - Straight line ripsaw
  - Sliding table saw
  - Panel saw
  - Cut off saw
  - Four side saw
  - Band saw
  - Horizontal band saw
  - Zig saw
  - Band saw CNC
  - Log saw
  - Radial arm saw
  - Combined machine
  - Double End Saw
  - Máy cắt tạo bọ eke ghế
- DRILLING MACHINE
  - Multi horizontal drilling machine
  - Multi vertical drilling machine
  - Máy khoan ghế
  - Straight line boring machine
  - Door Lock - Hinge Drilling Machine
  - Máy khoan 2 phương
  - Máy khoan 6 mặt
  - Máy khoan 2 đầu
- PLANER MACHINE
  - Double side planer
  - 4 side planer
  - Hand jointer
  - Automatic planer
  - Seat planer
- SANDING MACHINE
  - Conveyors sanding
  - Round sander
  - Irregular curve sanding
  - Edge sanding
  - Wide belt sanders
  - Lacquered panel sander
  - Milling sanding machine
  - Deformation sanding machine
  - Top-Bottom Sanding Systems
- TENONER MACHINE
  - Hollow chisel mortiser
  - Continuous dovetailer
  - Fully auto louver groovers
  - Oscillating Mortiser
  - Round end tenoner
  - Machine tenoner Oval
- SHAPING MACHINE
  - Copy shaping machine
  - Copy shaping circle machine
  - Spindle shaper machine
- ENGRAVING MACHINE
- LATHE MACHINE
- FINGER JOINT AND CLAMP CARIER
  - Auto finger joint machine
  - Clamp carrier machine
  - High Frequency Press machine
  - Frame assembly machine
- PRESSING MACHINE
  - Hot press equipment
  - Cold press equipment
  - Door Pressing Machine
  - Veneer membrane press
  - Wood bending
  - High frequency press
- GRINDING MACHINE
- VENEER MACHINE
- DOWEL MAKING MACHINE
- POWER FEEDER
- UV COATING MACHINE
- GLUE SPREADER
- WOOD PALLET MAKING MACHINE
- WOOD BARKING MACHINE
- EMBOSSING MACHINE
- DUST COLLECTOR
- AIR COMPRESSOR
- AUXILIARY MACHINE
- Máy cắt bọ eke
- Máy đa chức năng
HARD WARE
- CIRCULAR SAW BLADES
- PCD Diamond Saw Blades
- BORING HEAD
- PLANER KNIFE
- HAND TOOLS
- OTHER
FINISHING LINE
USED MACHINE
- SAWING MACHINE
- SANDING MACHINE
- CNC MACHINE
- SHAPING MACHINE
- EDGE BANDING MACHINE
- FINGER JOINT AND PRESSING MACHINE
- AIR COMPRESSOR
- VENEER MACHINE
- SYSTEM LEATHER MACHINE
- PLASTIC INJECTION MACHINE
- OTHER MACHINE

BOTTOM SANDING MACHINE 0.6 M – Model: SH – 25RPL
Max. working width:			: 610 mm
Max. working thickness:			: 3 – 130 mm
R Spindle		Diameter	: Ø 220
		Motor	: 15 Hp
P Spindle		P roller rear spindle rubber roller	: Ø 130
		P roller rear down sanding	: Ø 110
		Motor	: 10 Hp
Feeding power			: 2 Hp – Frequency inerter controller
Table hoist power			: ½ Hp
Vacuum feeding motor			: 3 Hp
Sanding belt size			: 635 x 1905 mm
Thickness digital controller.
Feeding operation height			: 1100mm
Pressure switch			:when air is not enough, It will Stop running auto.
Pressure use pressure pad and pressure roller.
Anti-explosion switch			:When sanding belt is broken power off auto and conveyor will down auto to protect conveyor and rubber roller
CONVEYOR
Spindle power:			: 1/2HP Frequency inverter controller)
Max. working width			: 610 mm
Max. working length:			: 1500 mm
Distance from feeder surface to floor			: 1100mm
TOP SANDING MACHINE 0.6 M– Model: SH – 25RP
Max. working width			: 610 mm
Max. working thickness			: 3 – 130 mm
R Spindle	Diameter		: Ø 220
	Motor		: 15 Hp
P Spindle	P roller rear spindle rubber roller		: Ø 130
	P roller rear down sanding		: Ø 110
	Motor		: 10 Hp
Feeding power			: 2 Hp – Frequency inerter controller
Table hoist power			: ½ Hp
Vacuum feeding motor			: 3 Hp
Sanding belt size			: 635 x 1905 mm
Thickness digital controller
Feeding operation height			: 1100mm
Pressure switch			:when air is not enough, It will Stop running auto.
Pressure use pressure pad and pressure roller
Anti-explosion switch			:When sanding belt is broken power off auto and conveyor will down auto to protect conveyor and rubber roller.

STANDARD TOP-BOTTOM SANDING SYSTEMS 0.6M

STANDARD TOP/ BOTTOM SANDING SYSTEMS 0.6M

MÁY CHÀ NHÁM CHỔI CHÉP HÌNH 2 TRỤC

CYLINDRICAL EDGE SANDING MACHINE

6 AXIS BRUSH SANDING MACHINE 1M3

MÁY CHÀ NHÁM THÙNG 700MM

MÁY CHÀ NHÁM CHỔI PIANO

MÁY CHÀ NHÁM VENEER

MÁY CHÀ NHÁM CẠNH THẲNG

KITCHEN DOORS WARDROBE EDGE SANDING MACHINE

MÁY CHÀ NHÁM CHỔI CHÉP HÌNH 2 TRỤC

CYLINDRICAL EDGE SANDING MACHINE

6 AXIS BRUSH SANDING MACHINE 1M3

MÁY CHÀ NHÁM THÙNG 700MM

MÁY CHÀ NHÁM CHỔI PIANO

MÁY CHÀ NHÁM VENEER

About

BUSINESS