CONTINUOUS DOVETAILER (FOR CURVED BOARD)

production line
- INDUSTRIAL WOODEN PLANKS SYSTEM
  - Small production line
  - Nesting line
  - Cabinet Line
- SYSTEM MAKE CHAIR
  - Shaping Stage
  - Tenoner Stage
  - Link building Stage
  - Leg angle chair Stage
  - Fisnish Stage
- DOOR MAKING SYSTEM
  - Công đoạn làm khung bao
  - Công đoạn làm cánh cửa
  - Công đoạn làm khung xương
- FINGER JOINT SYSTEM
- LOG MULTI RIP SAW SYSTEM
- PAPER LAMINATING MACHINE
WOODWORKING MACHINE
- CNC MACHINE
  - CNC Nesting Machining
  - Machine router CNC
  - CNC DRILLING MACHINE
  - Machine tenoner CNC
- EDGE BANDING MACHINE
  - Edge banding machine
  - Automatic edge banding machine
  - Postforming machine
  - Inclined edge banding
- SAWING MACHINE
  - Straight line ripsaw
  - Sliding table saw
  - Panel saw
  - Cut off saw
  - Four side saw
  - Band saw
  - Horizontal band saw
  - Zig saw
  - Band saw CNC
  - Log saw
  - Radial arm saw
  - Combined machine
  - Double End Saw
  - Máy cắt tạo bọ eke ghế
- DRILLING MACHINE
  - Multi horizontal drilling machine
  - Multi vertical drilling machine
  - Máy khoan ghế
  - Straight line boring machine
  - Door Lock - Hinge Drilling Machine
  - Máy khoan 2 phương
  - Máy khoan 6 mặt
  - Máy khoan 2 đầu
- PLANER MACHINE
  - Double side planer
  - 4 side planer
  - Hand jointer
  - Automatic planer
  - Seat planer
- SANDING MACHINE
  - Conveyors sanding
  - Round sander
  - Irregular curve sanding
  - Edge sanding
  - Wide belt sanders
  - Lacquered panel sander
  - Milling sanding machine
  - Deformation sanding machine
  - Top-Bottom Sanding Systems
- TENONER MACHINE
  - Hollow chisel mortiser
  - Continuous dovetailer
  - Fully auto louver groovers
  - Oscillating Mortiser
  - Round end tenoner
  - Machine tenoner Oval
- SHAPING MACHINE
  - Copy shaping machine
  - Copy shaping circle machine
  - Spindle shaper machine
- ENGRAVING MACHINE
- LATHE MACHINE
- FINGER JOINT AND CLAMP CARIER
  - Auto finger joint machine
  - Clamp carrier machine
  - High Frequency Press machine
  - Frame assembly machine
- PRESSING MACHINE
  - Hot press equipment
  - Cold press equipment
  - Door Pressing Machine
  - Veneer membrane press
  - Wood bending
  - High frequency press
- GRINDING MACHINE
- VENEER MACHINE
- DOWEL MAKING MACHINE
- POWER FEEDER
- UV COATING MACHINE
- GLUE SPREADER
- WOOD PALLET MAKING MACHINE
- WOOD BARKING MACHINE
- EMBOSSING MACHINE
- DUST COLLECTOR
- AIR COMPRESSOR
- AUXILIARY MACHINE
- Máy cắt bọ eke
- Máy đa chức năng
HARD WARE
- CIRCULAR SAW BLADES
- PCD Diamond Saw Blades
- BORING HEAD
- PLANER KNIFE
- HAND TOOLS
- OTHER
FINISHING LINE
USED MACHINE
- SAWING MACHINE
- SANDING MACHINE
- CNC MACHINE
- SHAPING MACHINE
- EDGE BANDING MACHINE
- FINGER JOINT AND PRESSING MACHINE
- AIR COMPRESSOR
- VENEER MACHINE
- SYSTEM LEATHER MACHINE
- PLASTIC INJECTION MACHINE
- OTHER MACHINE

CONTINUOUS DOVETAILER

Model: YC-480A

Features
- Cuts dovetailed tenons/mortises simultaneously for accurate jointing - Dovetailed width and depth are adjustable. - Continuous tenoning motion - Automatic motion cycle provides efficient, economical operation - High spindle speed 20.000 rpm - Simple to operate, simple to maintain - 3 feed speeds change suitable for cutting various wood materials
	Rugged guide rod Tenoning head feeds on an oversized guide rod, hard chrome plated, for max stability of tenoning operation and max wear resistance
	Centralized control panel All of the machine motion controls are centralized on one control panel for operation convenienco. Control functions include single start/stop, manual/automatic mode selection
	Automatic lubricator With automatic lubricator provides YC 480 longer life
	Stable tenoning head The tenoning head is driven by a 2 HP motor with 20.000 rpm high spindle speed. Cutter bit can be micrometrically adjusted for tenon/mortise width
	Cuts dovetailed tenon and mortise simultaneously The workpiece to be jointed are placed together on the machine for cutting dovetailed tenons and mortises simultaneously, ensuring high accuracy jointing effect
	Replaceable Mold. Easy for Maintenance Easily clean the wood chips inside the molds by only taking off the two dust-proof covers.
Specifications
Tenon thickness	Min.10 mm, Max.20 mm
Tenon width	Min.10 mm, Max.18 mm
Tenon depth	Min.10 mm, Max.20 mm
Spindle vertical adjustment	30 mm
Table tilting angle	-10˚~+20˚
Maximum calmping device tilts	tilting
Maximum workpiece sizes	Length 1500 mm, Width 480 mm
Collect chuck capacity	Ø12 mm
Numbers of air clamps	4 PCS
Spindle speeds	21,500 R.P.M.
Spindle motor	2 HP
Working air pressure	6 BAR
Total horsepower	3 kw (4 HP)
Dust hood outlet diameter	ø3" x 1
Frequency inverter	Optional
Machine dimensions	1270 x 780 x 1330 mm
Packing dimensions	1420 x 910 x 1450 mm
Net / Gross weight	410 / 460 kgs
Video